CPR Course Perth (in-person)

CPR Course Information

‍HLTAID009 Provide Cardiopulmonary Resuscitation

The course will provide you with the practical skills and knowledge to perform Cardio Pulmonary Resuscitation (CPR) on a casualty.

The course is a combination of self-paced online learning which takes approximately 1 hour, followed by a 1 hour face to face assessment. You are required to complete the online learning before attending the face to face practical assessment.

For further information please click on the Course Delivery Mode and Assessment Information tab. Training and assessment delivered on behalf of Allens Training Pty Ltd RTO 90909.

Course Overview

Cardiac arrest is a medical emergency that can lead to death. With urgent medical care to restart the heart, survival is possible.

Quick decision making is required to recognise and assess a cardiac emergency, call for medical assistance and perform Cardiopulmonary Resuscitation (CPR) procedures which will increase the chance of survival for a person who is unconscious and not breathing normally.

In this CPR course, you will learn these skills, in line with the Australian Resuscitation Council guidelines, including using an automated external defibrillator (AED), how to rotate first aiders with minimal interruptions to compressions, and what to do if the casualty regurgitates or vomits.

The course also covers conveying accurate incident details when handing the casualty over to emergency services, how to review an incident, to recognise any psychological impacts on self and other rescuers, to seek help if required and for improvement of own personal skills and response times.

Qualifications Issued

On successful completion of the course students will be issued with a nationally recognised Statement of Attainment for:

HLTAID009 - Provide Cardiopulmonary Resuscitation

It is recommended that the CPR certificate be renewed every 12 months in line with Australian Resuscitation guidelines. The CPR Certificate is issued by our Training Partner, Allens Training Pty Ltd RTO #90909

Assessment Activities

Performance tasks and scenarios:

Perform CPR on an adult (incl. the use of an AED (defibrillator) and placing a casualty into the recovery position)
Complete a first aid incident report form based on the simulated first aid scenario
Perform CPR on an infant

Entry Requirements

Physical capability to be able to meet the demands of the practical demonstration skills including CPR (Important note: In order to issue an accredited certificate CPR must be performed on the floor with no exemptions)
Sufficient English language, literacy, numeracy and visual interpretation skills to successfully complete the course
If required, students must complete the online pre-course work prior to attending the in-person session depending on the course delivery mode
Online study: Students must have access to a computer, smartphone, tablet or other electronic device with access to the internet to complete the online/ pre-course studies.
Valid Unique Student Identifier (USI) required prior to course commencement. Click here for more information on setting up a USI if you don’t have one.

Course Delivery Mode and Duration

Course Delivery Mode:

Online learning followed by in-person assessment.

Course Duration:

In-person assessment - approximately 1 hour to complete
Online component - around 1 hour to complete

Course Day Information

To ensure you can successfully complete the CPR Course we ask the following:

Bring your mobile device and remember your Training Desk Login details that have been provided to you‍
Arrive 10 minutes prior to the course start time. Late arrivals will not be allowed to attend the course.
Wear appropriate attire including enclosed shoes.
Ensure you have verified your USI
100% completion of the online learning material prior to arrival
Provide photo ID upon entry

Students unable to meet the above requirements on the day will have to reschedule in-person training.

Course Handbook

Click to download course handbook (PDF)

Rescheduling & Cancellation Policy

We understand that unforeseen circumstances may require in-person course bookings to be rescheduled. To reschedule an in-person course, please email us at admin@etatraining.com.au

‍If we receive your reschedule request 2 or more business days prior to a course, no fees will apply.

If you withdraw less than 2 days prior to your course, or fail to turn up on the day of your training, no refunds can be given.

All requested changes to a booking must be made in writing. In the event of a cancellation request by a customer, a voucher will be issued to the value of the amount paid. This voucher can be used to book any future courses with us.

View Related Training Courses

First Aid Course + CPR

‍HLTAID011 Provide First Aid‍‍
HLTAID010 Provide Basic Emergency Life Support‍‍
HLTAID009 Provide Cardiopulmonary Resuscitation

$130

VIEW COURSE

LVR CPR Course

‍UETDRRF004 Low Voltage Rescue‍
HLTAID009 Provide Cardiopulmonary Resuscitation

Low voltage rescue unit UETDRRF004 has been extended for an additonal 12 month period. If you require the new unit UETDRMP007 (which will supersede UETDRRF004 in 12 months) please contact our office directly.

$130

VIEW COURSE

LVR & First Aid Course + CPR

‍UETDRRF004 Low Voltage Rescue
HLTAID011 Provide First Aid‍‍
HLTAID009 Provide Cardiopulmonary Resuscitation
HLTAID010 Basic Emergency Life Support

Low voltage rescue unit UETDRRF004 has been extended for an additional 12 month period. If you require the new unit UETDRMP007 (which will supersede UETDRRF004 in 12 months) please contact our office directly.

$220

VIEW COURSE

Why Choose ETA Training for your Perth CPR Course?

Enhance Workplace Safety

Nationally recognised training reduces the risk of mis-identifying workplace hazards, ensuring a safer working environment.

Increase Employability

A nationally recognised certification from ETA Training enhances your resume and opens up more job opportunities in various industries.

Flexible Learning Options

With a combination of online modules and face-to-face training, you can learn at your own pace and convenience.

Expert Instruction

Learn from experienced trainers with decades of industry knowledge, ensuring you receive a quality learning experience and on-going support.

Immediate Certification

Receive your certification promptly after course completion, allowing you to start applying your skills immediately.

Completing our CPR Training Course ensures you gain industry-leading knowledge and practical skills. Our course not only meets the highest national standards but also offers comprehensive benefits.

By choosing ETA Training, you're ensuring that you receive the highest possible qualification and training in CPR, equipping you with the skills and knowledge needed to excel in your field. Enrol today and take the first step towards a safer and more compliant workplace.

General Test & Tag FAQs

Generally asked Test and Tag Course Questions. Can't see your answer? Contact Us!

Where do I locate my Test & Tag License number?

Your licence number is located on your Statement of Attainment certificate. Use the last seven digits of the certificate number as the licence number.

Test and tag regulations in WA

WA regulations requires that anyone who does not have an electrical qualification should be competent when using a Portable ApplianceTester (PAT) when testing and tagging electrical equipment. To be deemed competent you need to have successfully completed a nationally recognised training course and received a Statement of Attainment.

Does hire equipment need to be tested and tagged in the workplace?

According to AS/NZS3012 hire equipment needs to be inspected prior to hire and once on site it should be tested once a month. If portable hire equipment remains on site longer than 1 month it should be tested and tagged every 3 months. If you are using hire equipment and it is due to be tested and tagged then it becomes your responsibility to have it tested.

What Australian standards should I refer to for testing and tagging?

AS/NZS 3760 is the main standard for testing and tagging electrical equipment and appliances. AS/NZS 3012 also has information on testing and tagging and is directly related to the construction and demolition sites. Worksafe WA have also published a free Guide to testing and tagging portable electrical equipment and residual current devices at workplaces.

What needs to be tested and tagged?

It is recommended that any cord connected equipment (toasters, drills, computers, power tools) and cord assemblies (extension leads, power boards, EPODs, computer leads, phone/battery chargers) in the workplace are tested and tagged. If the equipment can be plugged into a low voltage supply (240V) then it’s always recommended the appropriate test and inspections are performed to ensure the equipment is safe to use.

Does new equipment need to be tested and tagged?

You don’t need to test new equipment but a visual inspection must be carried out to check for any obvious damage. You are given this option for new equipment because the supplier is the one deemed responsible for making sure the electrical equipment is safe to use.
‍
A “New to Service” tag can be used for equipment that is new and entering service for the first time. The tag shall contain the following information:

Wording “new to service”
Date of entry to service
Date when next test is due
Statement “This appliance has not been tested in accordance with AS/NZS 3760”.

Do you need to test and tag office equipment?

It is not a legal requirement to test and tag office equipment but the WHS regulations in WA require a person conducting a business or undertaking (PCBU) ensure that all electrical equipment is regularly checked to reduce risk or harm to people in the workplace.

What are the test and tag colours for WA?

If you are working in the construction, demolition or mining industry you would refer to AS/NZ 3012 for test and tag colours:

Red: December, January, February

Green: March, April, May

Blue: June, July, August

Yellow: September, October, November

Check your local state/territory legislation and regulations as they may require tags to be a certain colour.

How long does the test and tag course certificate last?

The nationally recognised Statement of Attainment that you receive when you successfully complete your test and tag course does not have an expiry date. This means once you are deemed competent you are not required to renew your qualification.

However according to AS/NZS3760 all inspection and testing of equipment must be carried out by a Competent Person. Keeping up to date with workplace regulations, relevant standards such as AS/NZS 3760, Codes of Practices and Guidelines will ensure you have the skills and knowledge to competently test and tag.

How often is RCD testing required?

RCDs provide personal protection and save lives which is why there are strict guidelines in place for testing intervals. According to AS/NZS 3012 which relates to construction and demolition sites, portable RCDs require a push-button test every day. An operating trip time is also required every 3 months.AS/NZS 3760 recommends that portable RCDs located in factories, maintenance workshop or similar are subjected to a daily push-button test or before each time they are used.

How often is testing and tagging required?

It depends on what industry you are involved in and the operating conditions that the equipment is subjected to, such as vibration, heat, chemicals, dust. Mining, construction and demolition sites test cord connected equipment every 3 months. It is recommended that factories, workshops and manufacturing areas test and tag every 6 months. For further information AS/NZS 3760 2022 and AS/NZS 3012 provide recommended testing intervals.

Is testing and tagging mandatory?

It is mandatory for businesses in the construction, demolition and mining industries to test and tag. For all other workplaces it is not a requirement to test and tag but all electrical equipment must be regularly checked and inspected to reduce the risk of injury or harm to employees.

CPR Course Perth (in-person)

Book your Perth CPR Training Course

Why Choose ETA Training for your Perth CPR Course?

Enhance Workplace Safety

Increase Employability

Flexible Learning Options

Expert Instruction

Immediate Certification

CPR Trainer Profile Aaron Rix

Convenient Perth Training Facilities

ETA Training Treeby

ETA Training Welshpool

ETA Training Wangara

CPR Course Perth (in-person)

Book your Perth CPR Training Course

CPR Course Information

Course Overview

Qualifications Issued

Assessment Activities

Entry Requirements

Course Delivery Mode and Duration

Course Day Information

Course Handbook

Rescheduling & Cancellation Policy

View Related Training Courses

First Aid Course + CPR

LVR CPR Course

LVR & First Aid Course + CPR

Why Choose ETA Training for your Perth CPR Course?

Enhance Workplace Safety

Increase Employability

Flexible Learning Options

Expert Instruction

Immediate Certification

CPR Trainer Profile Aaron Rix

CPR Course Perth FAQ

How do I enrol in the CPR Course?

How often do you run the CPR course?

How is the CPR Course course structured?

Can I pay for my CPR Course course online?

How often do you run the CPR, LVR and First-Aid courses?

How long after completing the course do I get my CPR certificate?

What’s the difference between the CPR Course and the First Aid Course?

General Test & Tag FAQs

Where do I locate my Test & Tag License number?

Test and tag regulations in WA

Does hire equipment need to be tested and tagged in the workplace?

What Australian standards should I refer to for testing and tagging?

What needs to be tested and tagged?

Does new equipment need to be tested and tagged?

Do you need to test and tag office equipment?

What are the test and tag colours for WA?

How long does the test and tag course certificate last?

How often is RCD testing required?

How often is testing and tagging required?

Is testing and tagging mandatory?

Convenient Perth Training Facilities

ETA Training Treeby

ETA Training Welshpool

ETA Training Wangara