Get nationally recognised certification, FAST!

LVR CPR Course Perth

Our Perth based Low Voltage Rescue (LVR) & CPR Training Course is available at Wangara, Welshpool and Treeby (Jandakot) training venues.

Schedule: Daily and Saturday mornings

Course Duration: 1 hour in-person plus online learning

Same-Day Certification: Upon successful completion

$130
per
person
BOOK YOUR COURSE

Book your Perth LVR CPR Training Course

online booking
Use our current training schedule to select your preferred training time, day, or location. Click to book!
phone booking
Call to book over the phone or email your booking request to our team.
Call 1300 858 095 or email admin@etatraining.com.au
LOCATION
DAY(S)
TIME(S)
BOOK NOW
Treeby
Monday
7am & 1pm
BOOK NOW
Wangara
Tuesday
7am
BOOK NOW
Wangara
Wednesday
7am & 1pm
BOOK NOW
Wangara
Thursday
7am
BOOK NOW
Welshpool
Friday
7am & 1pm
BOOK NOW
Wangara
Saturday
7am
BOOK NOW

LVR CPR Course Information

Low voltage rescue unit UETDRRF004 has been extended for an additonal 12 month period. If you require the new unit UETDRMP007 (which will supersede UETDRRF004 in 12 months) please contact our office directly.

This course provides practical skills and knowledge to perform Low Voltage Rescue (LVR) from a live low voltage (LV) electrical panel and cardiopulmonary resuscitation (CPR) on a casualty.

The LVR & CPR course is essential if you are performing live work or working with live switchboards.  The course is a combination of self-paced online learning which takes approximately 2 hours, followed by a 1 hour face to face assessment. You are required to complete the online learning before attending the face to face practical assessment.

‍

Course Overview

The CPR LVR course is essential if you are conducting live work or working with live switchboards. The course covers the performance of rescue procedures from a live Low Voltage (LV) apparatus, not including overhead lines and underground cables in the workplace.

It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for, health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work. Completing the course will provide an individual with the skills and knowledge to carry out and complete the LV panel rescue (LVR) procedures and to perform cardiopulmonary resuscitation (CPR) on a casualty in a range of situations. It consists of real-life practical skills and knowledge to allow the participant to be assessed as competent in providing CPR in line with

Australian Resuscitation Council (ARC) Guidelines as well as rescue procedures from an LV apparatus. Low voltage rescue comprises responsive operations that involve the saving of life, or prevention of injury during an incident or dangerous situation.

Qualifications Issued

On successful completion of the course students will be issued with a nationally recognised Statement of Attainment for:

  • HLTAID009 - Provide Cardiopulmonary Resuscitation
  • UETDRRF004 – Perform rescue from a live LV panel

It is recommended that this course be renewed every 12 months, in line with industry standards. The CPR Certificate is issued by our Training Partner, Allens Training Pty Ltd RTO #90909.

Assessment Activities

Performance tasks and scenarios:

  • Perform CPR on an adult (incl. the use of an AED and placing a casualty into the recovery position)
  • Perform CPR on an infant
  • Inspection and placement of rescue equipment and performing a rescue
  • Low voltage panel rescue

Entry Requirements

  • Physical capability to be able to meet the demands of the practical demonstration skills including CPR (Important note: In order to issue an accredited certificate CPR must be performed on the floor with no exemptions)
  • Physical fitness to be able to meet the demands of the practical demonstration skills including manual handling in the rescue of a mock casualty
  • Sufficient English language, literacy, numeracy and visual interpretation skills to successfully complete the course
  • Personal safety equipment (PPE) must be provided by the student and worn during practical sessions
  • If required, students must complete the online pre-course work prior to attending the in-person session depending on the course delivery mode
  • Online study: Students must have access to a computer, smartphone, tablet or other electronic device with access to the internet to complete the online/ pre-course studies.
  • Valid Unique Student Identifier (USI) required prior to course commencement. Click here for more information on setting up a USI if you don’t have one.

Course Delivery Mode and Duration

Course Delivery Mode:

  • Online learning followed by in-person assessment.

Course Duration:

  • In-person assessment - approximately 1 hour to complete
  • Online component - around 2 hours to complete

Course Day Information

To ensure you can successfully complete the LVR & CPR Course we ask the following:

  • Bring your mobile device and remember your Training Desk Login details that have been provided to you
  • Arrive 10 minutes prior to the course start time. Late arrivals will not be allowed to attend the course.
  • Wear appropriate attire including enclosed shoes.
  • Ensure you have verified your USI
  • 100% completion of the online learning material prior to arrival
  • Provide photo ID upon entry

Students unable to meet the above requirements on the day will have to reschedule in-person training.

Course Handbook

Click to download course handbook (PDF)

Rescheduling & Cancellation Policy

We understand that unforeseen circumstances may require in-person course bookings to be rescheduled. To reschedule an in-person course, please email us at admin@etatraining.com.au

‍If we receive your reschedule request 2 or more business days prior to a course, no fees will apply.

If you withdraw less than 2 days prior to your course, or fail to turn up on the day of your training, no refunds can be given.

All requested changes to a booking must be made in writing. In the event of a cancellation request by a customer, a voucher will be issued to the value of the amount paid. This voucher can be used to book any future courses with us.

Test & Tag Training

  • ‍UEECD0007 Apply work health and safety regulations, codes and practices in the workplace.‍
  • UEERL0003 Conduct in-service safety testing of electrical cord connected equipment and cord assemblies.
$350
VIEW COURSE

CPR Course

  • ‍HLTAID009 Provide Cardiopulmonary Resuscitation
$60
VIEW COURSE

First Aid Course + CPR

  • ‍HLTAID011 Provide First Aid‍‍
  • HLTAID010 Provide Basic Emergency Life Support‍‍
  • HLTAID009 Provide Cardiopulmonary Resuscitation
$130
VIEW COURSE

Why Choose ETA Training for Your LVR CPR Course?

Enhance Workplace Safety

Nationally recognised training reduces the risk of mis-identifying workplace hazards, ensuring a safer working environment.

Increase Employability

A nationally recognised certification from ETA Training enhances your resume and opens up more job opportunities in various industries.

Flexible Learning Options

With a combination of online modules and face-to-face training, you can learn at your own pace and convenience.

Expert Instruction

Learn from experienced trainers with decades of industry knowledge, ensuring you receive a quality learning experience and on-going support.

Immediate Certification

Receive your certification promptly after course completion, allowing you to start applying your skills immediately.

Completing our LVR CPR Training Course ensures you gain industry-leading knowledge and practical skills. Our course not only meets the highest national standards but also offers comprehensive benefits.

By choosing ETA Training, you're ensuring that you receive the highest possible qualification and training in LVR and CPR in Perth, equipping you with the skills and knowledge needed to excel in your field. Enrol today and take the first step towards a safer and more compliant workplace.

Instructor demonstrating CPR techniques on a training dummy during the LVR CPR course.
Trainer Aaron Rix demonstrating equipment testing techniques during the Test and Tag course at ETA Training.

Low Voltage Rescue (LVR) & CPR Trainer Profile Aaron Rix

With a decade of training experience and 25 years as an electrician in the construction, mining & commercial industries, ETA Trainer and Founder Aaron Rix will be your expert guide through Low Voltage Rescue & CPR training. Aaron has successfully trained thousands of Australians, completing over 650 nationally recognised training courses over the last decade.

ABOUT ETA TRAINING

Low Voltage Rescue (LVR) & CPR Course Perth FAQ

Check out our handy FAQ for all our commonly asked Low Voltage Rescue and CPR questions.

How often do you run the LVR & CPR Course?

We run LVR CPR daily between our 3 training venues and Saturday morning at our Wangara training facility.

All dates and start times are available on the ETA booking calendar.

What’s the difference between LVR/CPR & LVR/First Aid courses?

The Low Voltage Rescue & CPR Course and the Low voltage Rescue & First-Aid Course both offer the following units;

  • HLTAID009 Provide Cardiopulmonary Resuscitation, and
  • UETDRRF004 Perform Rescue from a Live LV Panel

In addition, the Low Voltage Rescue & First-Aid course also includes:

  • HLTAID010 Provide basic emergency life support
  • HLTAID011 Provide First Aid

How long after completing the course do I get my LVR/CPR certificate?

In most cases, Low Voltage Rescue & CPR certificate will be issued electronically within 24 hours of successful course completion. However, in rare cases, there may be delays processing your grades in which case your certificate may be later than 24 hours. If you are not successful in completing the course, you will not receive a certificate.

Can I pay for my LVR CPR Course course online?

Yes. Secure online payment is available when booking a course. Full payment is required before you commence the course to confirm your booking.

How is the LVR CPR Course course structured?

The first part of the course is the online component which takes around 2 hours and needs to be completed in your own time. Then you attend the in-person classroom component to complete your practical assessment which takes 1.5 hours.

Where is ETA Training located?

We have three training locations in Perth - Wangara is our main training venue and is conveniently located at Unit 5/10 O'Connor Way, Wangara, Perth. We also offer training in Treeby at the Treeby Community Centre, 1 Torwood Ave, Treeby and Welshpool at the Welshpool Learning Centre, 37 Murray Road S, Welshpool. We have ample free parking available onsite.

Do you do onsite training?

Yes we do! For corporate clients interested in group training we will come to your business. Our onsite training includes access to our online training management system, where you can easily store all the details and expiries for anyone in your organisation who has completed our training. Visit our onsite training page for more information.

Why choose ETA Training?

Having delivered over 650 nationally recognised training courses, our highly experienced trainers will provide you with the knowledge and skills required to get certified. Our hands-on approach ensures you get certification and can start operating safely and correctly.

General Test & Tag FAQs

Generally asked Test and Tag Course Questions. Can't see your answer? Contact Us!

Where do I locate my Test & Tag License number?

Your licence number is located on your Statement of Attainment certificate. Use the last seven digits of the certificate number as the licence number.

Test and tag regulations in WA

WA regulations requires that anyone who does not have an electrical qualification should be competent when using a Portable ApplianceTester (PAT) when testing and tagging electrical equipment. To be deemed competent you need to have successfully completed a nationally recognised training course and received a Statement of Attainment.

Does hire equipment need to be tested and tagged in the workplace?

According to AS/NZS3012 hire equipment needs to be inspected prior to hire and once on site it should be tested once a month. If portable hire equipment remains on site longer than 1 month it should be tested and tagged every 3 months. If you are using hire equipment and it is due to be tested and tagged then it becomes your responsibility to have it tested.

What Australian standards should I refer to for testing and tagging?

AS/NZS 3760 is the main standard for testing and tagging electrical equipment and appliances. AS/NZS 3012 also has information on testing and tagging and is directly related to the construction and demolition sites. Worksafe WA have also published a free Guide to testing and tagging portable electrical equipment and residual current devices at workplaces.

What needs to be tested and tagged?

It is recommended that any cord connected equipment (toasters, drills, computers, power tools) and cord assemblies (extension leads, power boards, EPODs, computer leads, phone/battery chargers) in the workplace are tested and tagged. If the equipment can be plugged into a low voltage supply (240V) then it’s always recommended the appropriate test and inspections are performed to ensure the equipment is safe to use.

Does new equipment need to be tested and tagged?

You don’t need to test new equipment but a visual inspection must be carried out to check for any obvious damage. You are given this option for new equipment because the supplier is the one deemed responsible for making sure the electrical equipment is safe to use.
‍
A “New to Service” tag can be used for equipment that is new and entering service for the first time. The tag shall contain the following information:

  • Wording “new to service”
  • Date of entry to service
  • Date when next test is due
  • Statement “This appliance has not been tested in accordance with AS/NZS 3760”.

Do you need to test and tag office equipment?

It is not a legal requirement to test and tag office equipment but the WHS regulations in WA require a person conducting a business or undertaking (PCBU) ensure that all electrical equipment is regularly checked to reduce risk or harm to people in the workplace.

What are the test and tag colours for WA?

If you are working in the construction, demolition or mining industry you would refer to AS/NZ 3012 for test and tag colours:

Red: December, January, February

Green: March, April, May

Blue: June, July, August

Yellow: September, October, November

Check your local state/territory legislation and regulations as they may require tags to be a certain colour.

How long does the test and tag course certificate last?

The nationally recognised Statement of Attainment that you receive when you successfully complete your test and tag course does not have an expiry date. This means once you are deemed competent you are not required to renew your qualification.

However according to AS/NZS3760 all inspection and testing of equipment must be carried out by a Competent Person. Keeping up to date with workplace regulations, relevant standards such as AS/NZS 3760, Codes of Practices and Guidelines will ensure you have the skills and knowledge to competently test and tag.

How often is RCD testing required?

RCDs provide personal protection and save lives which is why there are strict guidelines in place for testing intervals. According to AS/NZS 3012 which relates to construction and demolition sites, portable RCDs require a push-button test every day. An operating trip time is also required every 3 months.AS/NZS 3760 recommends that portable RCDs located in factories, maintenance workshop or similar are subjected to a daily push-button test or before each time they are used.

How often is testing and tagging required?

It depends on what industry you are involved in and the operating conditions that the equipment is subjected to, such as vibration, heat, chemicals, dust. Mining, construction and demolition sites test cord connected equipment every 3 months. It is recommended that factories, workshops and manufacturing areas test and tag every 6 months.  For further information AS/NZS 3760 2022 and AS/NZS 3012 provide recommended testing intervals.

Is testing and tagging mandatory?

It is mandatory for businesses in the construction, demolition and mining industries to test and tag. For all other workplaces it is not a requirement to test and tag but all electrical equipment must be regularly checked and inspected to reduce the risk of injury or harm to employees.

LVR CPR course held at our Perth training facilities

Free onsite parking

Convenient industry located locations

Small, hands on class sizes

ETA Training Treeby

Treeby Community Centre
1 Torwood Ave, Treeby WA 6164

ViEW LOCATION DETAILS

ETA Training Welshpool

37 Murray Rd S
Welshpool WA 6106

ViEW LOCATION DETAILS

ETA Training Wangara

Unit 5/10 O'Connor Way
Wangara WA 6065

ViEW LOCATION DETAILS
Got a question about our LVR CPR Course?
Call us on 1300 858 095 or complete our enquiry form and we'll be in touch!
Contact Us
1300 858 095
admin@etatraining.com.au
ETA Training
Unit 5/10 O'Connor Way
Wangara
Western Australia 6065
Training Centres
ETA WelshpoolETA TreebyETA Wangara
BOOKING CALENDAR
Proudly an Allens Training Pty Ltd Partner since 2022, RTO 90909
© 2022 ETA Training. All Rights Reserved.
Privacy Policy
Terms & Conditions
Website by